Welcome to the official website of  Luoyang WeiXiang Abrasives CO.,Ltd.!

call

+86 0379-69935557

call

bourne@lywxabrasives.com

made-in-china

Made in china

11

2020

-

05

The details of Weixiang grinding wheel tablets in use

1. After the installation of the grinding wheel, it should be idle for 1-2 minutes and then officially used; before use, the operator must wear safety protective equipment such as goggles, dust mask, gloves and so on.
2. The operating speed of the grinding wheel should not exceed the working linear speed specified by the trademark. When using a pneumatic grinder, especially when multiple machines use the same air source, the air pressure should be controlled to prevent the air pressure from being too large, resulting in exceeding the maximum speed. The blast of the grinding wheel hurt people.
3. When using the grinding wheel, the force should be advanced slowly. If the force is too strong, the phenomenon that the grinding wheel stalls and jams and breaks the grinding wheel is easy to occur. If the grinding wheel is stuck, the grinding wheel should be lifted immediately to avoid burnout or jamming of the grinding wheel.
4. When cutting and grinding the workpiece, the workpiece must be fixed. It is not allowed to stand in front of the workpiece, and multiple workpieces are not allowed to be stacked and cut, so as not to cause the grinding wheel to jam and cause an accident.
5. It is not allowed to use the side of the cutting wheel for grinding work. When cutting, no pressure should be applied to the side of the cutting wheel.

Pre：

GUIDE TO CUTTING WHEELS

Next：

none

Related information

FAQ — Luoyang Weixiang Abrasives Co., Ltd.

10-15

2026

FAQ — Luoyang Weixiang Abrasives Co., Ltd.

Selection Guide for Blasting Abrasives: Performance Comparison of Brown Fused Alumina, White Fused Alumina, and Black Fused Alumina

10-14

2026

In industrial surface treatment, the selection of blasting abrasives directly affects processing efficiency, surface quality, and overall cost. Brown Fused Alumina, White Fused Alumina, and Black Fused Alumina are three commonly used corundum-type abrasives. Due to differences in smelting raw materials and processes, they exhibit significant variations in chemical purity, physical properties, and application scenarios. Based on technical indicators, this article systematically reviews the selection logic of the three.

Metallographic Cut-off Wheel 350×2.5×32mm WA80 – Product Manual

10-10

2026

Luoyang Weixiang Abrasives Co., Ltd. manufactures precision cut-off wheels for metallographic sample preparation. The 350×2.5×32mm WA80 wheel features white fused alumina (WA) abrasive with resin bond, designed for laboratory cut-off machines.

SAF Coolest v1.3.1.1 设置面板QUNSX-ZSQA-EAASE-ZDA

违禁词： 第一，最，一流，领先，独一无二，王者，龙头，领导者，极致，
营业执照及SEO链接： 营业执照

无数据提示

Sorry，当前栏目暂无内容！

您可以查看其他栏目或返回 首页

V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用